Have a Question?
-
Injection Sprayers
-
-
-
- ASM-3320-V2 – Skid Honda Engine / Water Pump Assembly
- Water Pump Inlet Plumbing V3 – Skid – Gas
- Water Pump Inlet Plumbing V3 – Skid – Hydraulic
- Water Pump Outlet Plumbing V3 - Skid - Gas
- Water Pump Outlet Plumbing V3 - Skid - Hydraulic
- Water Pump Outlet Plumbing V4 - Skid - Gas
- Water Pump Outlet Plumbing V4 - Skid - Hydraulic
-
-
- RS6000 Gas Injection Skid Sprayer Manual V5.0
- RS6000 Gas Injection Skid Sprayer Manual V6.0
- RS6000 Gas Injection Skid Sprayer Manual V6.0 w/ Cannon Plug
- RS6000 Gas Injection Skid Sprayer Manual V6.1
- RS6000 Gas Injection Skid Sprayer Manual V6.1 w/ Cannon Plug
- RS6000 Gas Injection Skid Sprayer Manual V6.3 w/ Cannon Plug
- RS6000 Gas Injection Skid Sprayer Manual V6.4
- RS6000 Gas Injection Skid Sprayer Manual V6.4 w/ Cannon Plug
- RS6000 Gas Injection Skid Sprayer Manual V6.5
- RS6000 Gas Injection Skid Sprayer Manual V6.5 w/ Cannon Plug
- RS6000 Gas Injection Skid Sprayer Manual V6.6 w/ Cannon Plug
-
-
Anti-Icing Sprayers
-
Search Support
Recent Posts
Categories
Archives
TASC Error 4, Pump #
Last Updated On
Print Problem
The TASC console displays an Error 4, Pump # message while trying to spray.
Definition
An Error 4, Pump # condition means the TASC console is receiving signals that the specified pump is turning when it should not be.
Solution
Please verify if the pump is turning when it should not be (pump switch off, no boom sections on, etc). If it is turning, remove the pump fuse and contact our service technicians for further help.
If the pump is not turning, please check the pump fuse and battery connections. A bad battery ground connection may cause this error. Contact our service technicians for more help if the problem continues.
Table of Contents